Terms of Use
By accessing this web site you agree to the Terms of Use set forth below. We reserve the right to change these terms by posting a revision on this website.
GENERAL
DOWNLOADING; OTHER USE
USER CONTENT
We are pleased to hear from our customers. However, any original creative ideas you disclose to us shall be deemed the property of Jay-Cee Sales & Rivet. We are free to use any such disclosure for any purpose and in any media without compensation, and you warrant that all "moral rights" in any such disclosure have been waived.
Jay-Cee Sales & Rivet reserves the right to regulate all content provided by third parties on this website, but we are not responsible for such content.
When participating in interactive portions of this website, you represent that you have the right to use any information or content you upload or post and agree to abide by the following rules: (1) you will not provide infringing, defamatory, obscene, threatening, abusive, illegal or otherwise improper content; (2) you will not upload viruses or harmful components; (3) you will not use the website to further any unlawful purpose or to violate the rights of any party; and (4) you will not provide content for a commercial purpose.
NO REPRESENTATIONS OR WARRANTIES
THIS WEBSITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. YOU HAVE THE SOLE RESPONSIBILITY FOR ADEQUATE PROTECTION AND BACKUP OF DATA AND/OR EQUIPMENT USED IN CONNECTION WITH THIS WEBSITE. YOU AGREE TO HOLD Jay-Cee Sales & Rivet HARMLESS FROM AND YOU COVENANT NOT TO SUE US FOR ANY CLAIMS BASED ON USE OF THIS WEBSITE. DEPENDING UPON APPLICABLE LAW, THE ABOVE EXCLUSION OF IMPLIED WARRANTIES MAY NOT APPLY TO YOU.
LIMITATION OF LIABILITY
UNDER NO CIRCUMSTANCES SHALL Jay-Cee Sales & Rivet BE LIABLE FOR ANY SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM ANY USE OF, OR THE INABILITY TO USE, ANY CONTENT ON THIS WEB SITE, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. DEPENDING UPON APPLICABLE LAW, THIS EXCLUSION MAY NOT APPLY TO YOU.
TRADEMARKS AND COPYRIGHTS
Nothing on this website confers any license under any property right, including without limitation, any right in trademark or copyright, of Jay-Cee Sales & Rivet or any third party. Jay-Cee Sales & Rivet® are registered trademarks. Trademarks, brands and names identified with products sold on this website are the property of their respective owners, not Jay-Cee Sales & Rivet. Unless otherwise indicated, all material on this site is copyright 2015 Jay-Cee Sales & Rivet, all rights reserved.
GENERAL
- This website is owned by Jay-Cee Sales & Rivet and is intended only for your use in purchasing products from us.
- Any unauthorized use, any change of information, or any interference with the availability of or access to this website is strictly prohibited.
- We make no representation that products referenced are legal, available or appropriate in your country or region.
- You are responsible for maintaining the confidentiality of your password and account and for all activities that occur under your account.
- The un-enforceability of any of these Terms shall not affect the enforceability of any of the other provisions.
DOWNLOADING; OTHER USE
- Any downloading or copying of any part of this website is strictly prohibited. Using bots, spiders and other indexing agents to copy any part of this website is likewise prohibited.
- You may not mirror or archive any part of or material contained in this site on any server or computer without Jay-Cee Sales & Rivet's written permission.
- Downloading CAD models, any software or any other information from this website does not give you title thereto. Redistribution or commercial exploitation of any content of this website or any software you download from this website is expressly prohibited.
- This website may contain hyperlinks to third party websites over which Jay-Cee Sales & Rivet has no control and for which Jay-Cee Sales & Rivet is not responsible.
USER CONTENT
We are pleased to hear from our customers. However, any original creative ideas you disclose to us shall be deemed the property of Jay-Cee Sales & Rivet. We are free to use any such disclosure for any purpose and in any media without compensation, and you warrant that all "moral rights" in any such disclosure have been waived.
Jay-Cee Sales & Rivet reserves the right to regulate all content provided by third parties on this website, but we are not responsible for such content.
When participating in interactive portions of this website, you represent that you have the right to use any information or content you upload or post and agree to abide by the following rules: (1) you will not provide infringing, defamatory, obscene, threatening, abusive, illegal or otherwise improper content; (2) you will not upload viruses or harmful components; (3) you will not use the website to further any unlawful purpose or to violate the rights of any party; and (4) you will not provide content for a commercial purpose.
NO REPRESENTATIONS OR WARRANTIES
THIS WEBSITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. YOU HAVE THE SOLE RESPONSIBILITY FOR ADEQUATE PROTECTION AND BACKUP OF DATA AND/OR EQUIPMENT USED IN CONNECTION WITH THIS WEBSITE. YOU AGREE TO HOLD Jay-Cee Sales & Rivet HARMLESS FROM AND YOU COVENANT NOT TO SUE US FOR ANY CLAIMS BASED ON USE OF THIS WEBSITE. DEPENDING UPON APPLICABLE LAW, THE ABOVE EXCLUSION OF IMPLIED WARRANTIES MAY NOT APPLY TO YOU.
LIMITATION OF LIABILITY
UNDER NO CIRCUMSTANCES SHALL Jay-Cee Sales & Rivet BE LIABLE FOR ANY SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM ANY USE OF, OR THE INABILITY TO USE, ANY CONTENT ON THIS WEB SITE, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. DEPENDING UPON APPLICABLE LAW, THIS EXCLUSION MAY NOT APPLY TO YOU.
TRADEMARKS AND COPYRIGHTS
Nothing on this website confers any license under any property right, including without limitation, any right in trademark or copyright, of Jay-Cee Sales & Rivet or any third party. Jay-Cee Sales & Rivet® are registered trademarks. Trademarks, brands and names identified with products sold on this website are the property of their respective owners, not Jay-Cee Sales & Rivet. Unless otherwise indicated, all material on this site is copyright 2015 Jay-Cee Sales & Rivet, all rights reserved.
-
Anchors
- Concrete Screws
- Double Expansion Anchors
- Drop-In Anchors
- Expansion Pin Anchors, Zinc Yellow
- Hammer Drive Anchors, Mushroom Head
- Hollow Wall Anchors
- Lag Screw Shields
- Lead Wood Screw Anchor
- Machine Screw Anchors
- Nylon Hammer Drive Anchors
- Plastic Anchor
- Plastic Anchor Kits
- Setting Tools
- Single Expansion Anchors
- Sleeve Anchors
- Split Drive Anchors
- T-Anchors
- Toggle Bolts
- Wallboard Anchors
- Wedge Anchors
- Bolts
-
U Speed Clips, Bits, Pins, S Hooks
- Bits, Bit Holders and Nutsetters
- S-Hooks
-
Cotter Pins, Dowel Pins, Hitch Pins, Sping Pins
- Cotter Pins, Steel Zinc
- Dowel Pins, Bright
- Dowel Pins, Ebony
- Hitch Pin Clips, Zinc
- Spring Pins, 420 Stainless Steel
- Spring Pins, METRIC Steel, Thermal Black
- Spring Pins, Steel Black and Oiled
- Spring Pins, Steel Zinc
- Carbon Stl, Thermal Black Spring Pins
- 18-8 SS Slotted Spring Pins
- Dowel Pins, 400 SS to MS16555
- Coiled Spring Pins, 420 SS
- Cotter Pins, T321 SS to MS9245
- Spring Pins, MS16562 Stl Zinc Phos
- U-Type Speed Clips
- Metric Fasteners
-
Military Hardware
- Hex Cap Screws
- Hex Nuts
-
Machine Screws
- MS24693 100-deg Flat Phil Coarse&Fine SS w/Blk Ox
- MS24693 100-deg Flat Phil Coarse & Fine Stl Cad Y
- MS24693-C 100-deg Flat Phil Coarse & Fine SS
- MS35190 82-deg Flat Phil Coarse Stl Cad
- MS35191 82-deg Flat Phil Fine Stl Cad
- MS35206 Pan Phil Coarse Steel Cad Y
- MS35207 Pan Phil Fine Steel Cad Y
- MS35265 Drilled Slotted Fillister, Coarse Stl Cad
- MS35266 Drilled Slotted Fillister, Fine Stl Cad
- MS35275 Drilled Slotted Fillister Coarse SS
- MS35276 Drilled Slotted Fillister Fine SS
- MS51957 Pan Phil Coarse SS
- MS51957 Pan Phil Coarse SS w/Blk Ox
- MS51958 Pan Phil Fine SS
- MS51958 Pan Phil Fine SS w/Blk Ox
- MS51959 82-deg Flat Phil Coarse SS
- MS51960 82-deg Flat Phil Fine SS
- Self-Tapping Screws
- Drive Screws
- Socket Screws
-
Washers
- AN960 Flat Stl Cad y
- AN960-C Flat 18-8 SS
- AN960-CL Flat 18-8 SS
- AN960-L Flat Stl Cad Y
- AN970 Flat Stl Cad Y
- MS15795 Flat 300-series SS
- MS15795 Flat 300-series SS w/Black Oxide
- MS27183 Flat Stl Cad
- MS35333 Int. Tooth 410 SS
- MS35333 Int. Tooth Mechanical Z Yellow
- MS35335 Ext. Tooth 410 SS
- MS35338 Split Lk 316 SS
- MS35338 Split Lk 400-series SS
- MS35338 Split Lk Stl Zinc Yellow
- MS51848 High Collar Split Lk, Stl Black Phos
- MS51848 High Collar Split Lk, Stl Zinc-II
- NAS620 Flat 300-series SS
- NAS620 Light Flat 300-series SS
- NAS1149 Flat SS
- NAS1149 Flat Light series SS
-
Nuts
- Cage Nuts
- Cap Nuts
- Castle Nuts
- Conduit Lock Nuts, Die Cast Zinc
- Coupling Nuts
- Flange Nuts
- Flex Type Lock Nuts
- K-Lock
- Hex Nuts
- Machine Screw Nuts
- Metric Nuts
- Mil-Spec Nuts
- Nylon Lock Nuts
- Panel Nuts (Pipe)
- Reversible Hex Lock Nut, 2-Way
- Self Clinching Nuts
- Slotted Hex Nut
- Square Nuts
- Steel Spring Nuts
- Stover®-Equivalent Lock Nuts
- Tee Nuts
- Weld Nuts
- Wheel Nut, Right Hand
- Wing Nuts
- Retaining Rings
-
Screws
- Closed-End Eye Screw, Steel Zinc
- Concrete Screws
- Deck/Drywall Screws & Wood Screws
- Dowel Screws, Steel Zinc
- Flat Slotted Cap Screws
- Hex Cap Screws/Bolt
- Hex Jackscrews
- Hex Lag Screws
- Eye Lag Screws
-
Machine Screws
- 82° Flat Machine Screws
- 82° Flat Undercut Machine Screws
- 100° Flat Machine Screws
- 100° Flat Undercut Machine Screws
- Binding Undercut Machine Screws
- Fillister Machine Screws
- Hex Machine Screws
- Hex Washer Machine Screws
- Hex Washer, Serrated Machine Screws
- Metric Machine Screws
- Military-Spec Machine Screws
- Oval Machine Screws
- Oval Undercut Machine Screws
- Pan Machine Screws
- Round Machine Screws
- Round Washer Phillips, Zinc Machine Screws
- Truss Machine Screws
- Truss, Serrated Machine Screws
- Sheet Metal Screws/Self-Tapping Screws
-
Self-Drilling Screws / TEK
- Hex Washer w/ MS Threads - TEK® Self-Drilling Screws
- Hex Washer with Bonded NEO EPDM Washer - TEK® Self-Drilling Screws
- Special Pan Phillips, Steel Zinc - TEK® Self-Drilling Screws
- 82° Flat - TEK® Self-Drilling Screws
- 82° Flat Ucut Phil - TEK® Self-Drilling Screws
- Bugle Phillips - TEK® Self-Drilling Screws
- Hex, Unslotted, Steel Zinc - TEK® Self-Drilling Screws
- Hex Washer - TEK® Self-Drilling Screws
- Hex Washer, Serrated - TEK® Self-Drilling Screws
- Hex Flange, Unslotted w/Rubber Washer
- Oval Phillips - TEK® Self-Drilling Screws
- Oval Phillips Undercut - TEK® Self-Drilling Screws
- Pan - TEK® Self-Drilling Screws
- Round Washer - TEK® Self-Drilling Screws
- Trim Head - TEK® Self-Drilling Screws
- Truss - TEK® Self-Drilling Screws
- Truss, Modified - TEK® Self-Drilling Screws
- Wafer Phillips - TEK® Self-Drilling Screws
- Wafer Six-Lobe - TEK® Self-Drilling Screws
- Wafer Square Recess - TEK® Self-Drilling Screws
- Self-Piercing Screws
- SEMS Screws (Machine Screw Thread)
- Set Screw
- Socket Screws, Hex Wrenches, Pipe Plugs
- Thread Cutting Screws
- Thread Rolling Screws/ Thread Forming Screws
- Thumb Screws & Wing Screws
- Weld Screws
- Spacers, Standoffs & Electronic Hardware
-
Stainless Steel Fasteners
- Stainless Steel Anchors
- Stainless Steel Bolts
- Stainless Steel Cap Screws, Hex
- Stainless Steel Drywall Screws & Stainless Steel Deck Screws
- Stainless Steel Electronic Hardware
- Stainless Steel Flange Screws, 18-8
- Stainless Steel Lag Screws
- Stainless Steel Machine Screws
- Stainless Steel Metric Fasteners
- Military Hardware
- Stainless Steel Nuts
- Stainless Steel Slotted Pins
- Stainless Steel Retaining Rings
- Stainless Steel Self-Drilling Screws
- Stainless Steel Self-Piercing Screws
- Stainless Steel Self-Tapping Screws
- Stainless Steel Sems
- Stainless Steel Socket Srews
- Stainless Steel Thread-Cutting Screws
- Stainless Steel Thread-Rolling Screws
- Stainless Steel Thumb Screws
- Stainless Steel Washers
- Stainless Steel Wood Screws
- Studs- Clinch & B7
- Washers and Burrs
- Weld Screws & Weld Nuts