Terms of Sale & Returns
Terms
By purchasing from us, you agree to these terms and conditions. No other terms shall apply except as agreed in writing signed by us. We reserve the right to correct typographic errors and reject orders. Applicable law may prevent the sale of some products in your area.
Prices; Payment
Prices, title and risk of loss are F.O.B. our warehouse. Prices don't include taxes or shipment and may be changed without notice. Payment due at the time the order is placed Visa, MasterCard, and American Express.
Returns
All sales on tools are final.
If shipment appears damaged don't pay freight unless damage is marked on bill by carrier. A return authorization is required for all returns. Orders for parts may be returned within 30 days of receiving your order at a 20% restocking fee, all sales will be final after the 30 days. All tools are final sales unless the tool was damaged or deemed defective upon delivery. Returns will only be accepted in their original packaging and in full carton quantities.
Limited Warranty
Our only warranty obligation is to replace any item proved defective in material or workmanship. All other warranties, express or implies, including without limitation the implied warranties of mechantability and fitness for purose, are disclaimed.
Liability
We shall not be liable in contract, warranty, tort, or otherwise for consequential, special, exemplary or incidental damages. In no event shall our liability exceed the purchase price. Enforcing the limited replacement rights in your exclusive remedy.
Information
Information about products is as provided by our supplier. We make no warranty or representation concerning such information.
Some products sold by us contain ingredients know to the state of California to cause cancer and birth defects or other reproductive harm. Upon request, we will furnish you with material safety data sheets for hazardous substances as defined by OSHA.
Obligations
You warrant, represent and agree: (1) to comply with all laws; (2) that our sale and shipment of the product will not, by export thereof, your legal status or otherwise, cause us to violate any law; and (3) to indemnify us against any losses from a failure by you or a third party to comply with law or these terms and conditions, or from use of the product.
By purchasing from us, you agree to these terms and conditions. No other terms shall apply except as agreed in writing signed by us. We reserve the right to correct typographic errors and reject orders. Applicable law may prevent the sale of some products in your area.
Prices; Payment
Prices, title and risk of loss are F.O.B. our warehouse. Prices don't include taxes or shipment and may be changed without notice. Payment due at the time the order is placed Visa, MasterCard, and American Express.
Returns
All sales on tools are final.
If shipment appears damaged don't pay freight unless damage is marked on bill by carrier. A return authorization is required for all returns. Orders for parts may be returned within 30 days of receiving your order at a 20% restocking fee, all sales will be final after the 30 days. All tools are final sales unless the tool was damaged or deemed defective upon delivery. Returns will only be accepted in their original packaging and in full carton quantities.
Limited Warranty
Our only warranty obligation is to replace any item proved defective in material or workmanship. All other warranties, express or implies, including without limitation the implied warranties of mechantability and fitness for purose, are disclaimed.
Liability
We shall not be liable in contract, warranty, tort, or otherwise for consequential, special, exemplary or incidental damages. In no event shall our liability exceed the purchase price. Enforcing the limited replacement rights in your exclusive remedy.
Information
Information about products is as provided by our supplier. We make no warranty or representation concerning such information.
Some products sold by us contain ingredients know to the state of California to cause cancer and birth defects or other reproductive harm. Upon request, we will furnish you with material safety data sheets for hazardous substances as defined by OSHA.
Obligations
You warrant, represent and agree: (1) to comply with all laws; (2) that our sale and shipment of the product will not, by export thereof, your legal status or otherwise, cause us to violate any law; and (3) to indemnify us against any losses from a failure by you or a third party to comply with law or these terms and conditions, or from use of the product.
-
Anchors & Rivets
- Concrete Screws & Drill Bits
- Double Expansion Anchors
- Drop-In Anchors
- Expansion Pin Anchors, Zinc Yellow
- Hammer Drive Anchors, Mushroom Head
- Hollow Wall Anchors
- Lag Screw Shields
- Lead Wood Screw Anchor
- Machine Screw Anchors
- Nylon Hammer Drive Anchors
- Plastic Anchor
- Plastic Anchor Kits
- Setting Tools
- Single Expansion Anchors
- Sleeve Anchors
- Split Drive Anchors
- T-Anchors
- Toggle Bolts
- Wallboard Anchors
- Wedge Anchors
- Cable Ties
- Rivets
-
Bolts
- Galvanized Timber Bolt
- Joint Draw Bolt
- Bent Anchor Bolts
- Carriage Bolts
- Closed Eye Screw
- Elevator Bolts
- Hanger Bolts
- Hanger Bolt Fastener Drivers
- Hex Bolts / Cap Screws
- Open Eye Bolts
- Plow Bolts
- Step Bolts
- Square Bolts
- Square Head Battery Bolt
- Slotted Track Bolts, Ribbed Neck
- Thread Studs, Plain
- Toggle Bolts
-
U Speed Clips, Bits, Pins, S Hooks
- Bits, Bit Holders and Nutsetters
- S-Hooks
-
Cotter Pins, Dowel Pins, Hitch Pins, Sping Pins
- Dowel Pins, 400 SS to MS16555
- Dowel Pins, Bright
- Dowel Pins, Ebony
- Coiled Spring Pins, 420 SS
- Carbon Stl, Thermal Black Spring Pins
- 18-8 SS Slotted Spring Pins
- Spring Pins, 420 Stainless Steel
- Spring Pins, METRIC Steel, Thermal Black
- Spring Pins, MS16562 Stl Zinc Phos
- Spring Pins, Steel Black and Oiled
- Spring Pins, Steel Zinc
- Cotter Pins, T321 SS to MS9245
- Cotter Pins, Steel Zinc
- Hitch Pin Clips, Zinc
- U-Type Speed Clips
-
Metric Fasteners
- Wing Screw
- Domed Cap Acron Nut
- Coupling Nut
- Wing Nut
- Nuts
- Electronic Hardware, Clinch Nuts, Clinch Studs, Standoffs
-
Lock Nuts
- External Tooth K-Lock, A2 SS
- External Tooth K-Lock, Stl Zinc
- Nylon Insert DIN 985, 18-8 SS
- Nylon Insert DIN 985 A4 SS
- Nylon Insert DIN 985, Steel Zinc
- Prevail Torque DIN 980V
- Prevail Torque DIN 6926 Nylon Insert
- Prevail Torque IFI B18.16.3M
- Serrated, DIN 6923 Class 8 Zinc
- Top Lock Flange, DIN 6927
- Nylon Insert DIN 982 Stainless Steel
- Metric Cage Nuts & Metric Clinch Nuts
- Metric Hex Flange Bolts & Screws
- Metric Hex Nuts
- Metric Machine Screws
- Thread Forming Screws
- Thread Rolling Screws
- Washers
- Weld Nuts
-
Military Hardware
- Hex Cap Screws
- Hex Nuts
-
Machine Screws
- MS24693 100-deg Flat Phil Coarse&Fine SS w/Blk Ox
- MS24693 100-deg Flat Phil Coarse & Fine Stl Cad Y
- MS24693-C 100-deg Flat Phil Coarse & Fine SS
- MS35190 82-deg Flat Phil Coarse Stl Cad
- MS35191 82-deg Flat Phil Fine Stl Cad
- MS35206 Pan Phil Coarse Steel Cad Y
- MS35207 Pan Phil Fine Steel Cad Y
- MS35265 Drilled Slotted Fillister, Coarse Stl Cad
- MS35266 Drilled Slotted Fillister, Fine Stl Cad
- MS35275 Drilled Slotted Fillister Coarse SS
- MS35276 Drilled Slotted Fillister Fine SS
- MS51957 Pan Phil Coarse SS
- MS51957 Pan Phil Coarse SS w/Blk Ox
- MS51958 Pan Phil Fine SS
- MS51958 Pan Phil Fine SS w/Blk Ox
- MS51959 82-deg Flat Phil Coarse SS
- MS51960 82-deg Flat Phil Fine SS
- Self-Tapping Screws
- Drive Screws
- Socket Screws
-
Washers
- AN960 Flat Stl Cad y
- AN960-C Flat 18-8 SS
- AN960-CL Flat 18-8 SS
- AN960-L Flat Stl Cad Y
- AN970 Flat Stl Cad Y
- MS15795 Flat 300-series SS
- MS15795 Flat 300-series SS w/Black Oxide
- MS27183 Flat Stl Cad
- MS35333 Int. Tooth 410 SS
- MS35333 Int. Tooth Mechanical Z Yellow
- MS35335 Ext. Tooth 410 SS
- MS35338 Split Lk 316 SS
- MS35338 Split Lk 400-series SS
- MS35338 Split Lk Stl Zinc Yellow
- MS51848 High Collar Split Lk, Stl Black Phos
- MS51848 High Collar Split Lk, Stl Zinc-II
- NAS620 Flat 300-series SS
- NAS620 Light Flat 300-series SS
- NAS1149 Flat SS
- NAS1149 Flat Light series SS
-
Nuts
- Cage Nuts
- Cap Nuts
- Castle Nuts
- Conduit Lock Nuts, Die Cast Zinc
- Coupling Nuts
- Flange Nuts
- Flex Type Lock Nuts
- K-Lock
- Hex Nuts
- Metric Nuts
- Mil-Spec Nuts
- Nylon Lock Nuts
- Panel Nuts (Pipe)
- Reversible Hex Lock Nut, 2-Way
- Rivet Nuts
- Self Clinching Nuts
- Slotted Hex Nut
- Square Nuts
- Steel Spring Nuts
- Stover®-Equivalent Lock Nuts
- Tee Nuts
- Weld Nuts
- Wheel Nut, Right Hand
- Wing Nuts
- Retaining Rings
-
Screws
- Closed-End Eye Screw, Steel Zinc
- Concrete Screws
- Dowel Screws, Steel Zinc
- Flat Slotted Cap Screws
-
Machine Screws
- 82° Flat Head Machine Screws
- 82° Flat Undercut Head Machine Screws
- 100° Flat Head Machine Screws
- 100° Flat Head Undercut Machine Screws
- Binding Undercut Head Machine Screws
- Fillister Head Machine Screws
- Hex Head Machine Screws
- Hex Washer Head Machine Screws
- Hex Washer Head, Serrated Machine Screws
- Metric Machine Screws
- Military-Spec Machine Screws
- Oval Head Machine Screws
- Oval Undercut Head Machine Screws
- Pan Head Machine Screws
- Round Head Machine Screws
- Round Washer Phillips, Zinc Machine Screws
- Truss Head Machine Screws
- Truss Head, Serrated Machine Screws
-
Hex Cap Screws/Bolt
- 18-8 Stainless Hex Head Cap Screw
- 316 Stainless Hex Head Cap Screw
- Aluminum Hex Head Cap Screw
- Grade-2 Hex Head Cap Screw
- Grade-5, Steel Plain Hex Head Cap Screw
- Grade-5, Steel Zinc Hex Head Cap Screw
- Grade-8 Hex Head Cap Screw
- Grade-9, EcoGuard Gray/Silver Hex Head Cap Screw
- Metric Hex Head Cap Screw
- Military-Spec Hex Head Cap Screw
- Silicon Bronze Hex Head Cap Screw
- Hex Jackscrews
- Lag Screws
- Eye Lag Screws
- Sheet Metal Screws/Self-Tapping Screws
-
Self-Drilling Screws / TEK
- Pancake Head Self Drilling Screw
- Hex Washer w/ MS Threads - TEK® Self-Drilling Screws
- Hex Washer with Bonded NEO EPDM Washer - TEK® Self-Drilling Screws
- Special Pan Phillips, Steel Zinc - TEK® Self-Drilling Screws
- 82° Flat - TEK® Self-Drilling Screws
- 82° Flat Ucut Phil - TEK® Self-Drilling Screws
- Bugle Phillips - TEK® Self-Drilling Screws
- Hex, Unslotted, Steel Zinc - TEK® Self-Drilling Screws
- Hex Washer - TEK® Self-Drilling Screws
- Hex Washer, Serrated - TEK® Self-Drilling Screws
- Hex Flange, Unslotted w/Rubber Washer
- Oval Phillips - TEK® Self-Drilling Screws
- Oval Phillips Undercut - TEK® Self-Drilling Screws
- Pan - TEK® Self-Drilling Screws
- Round Washer - TEK® Self-Drilling Screws
- Trim Head - TEK® Self-Drilling Screws
- Truss - TEK® Self-Drilling Screws
- Truss, Modified - TEK® Self-Drilling Screws
- Wafer Phillips - TEK® Self-Drilling Screws
- Wafer Six-Lobe - TEK® Self-Drilling Screws
- Wafer Square Recess - TEK® Self-Drilling Screws
-
Self-Piercing Screws
- Hex Washer Self-Piercing Screws
- Modified Truss Self-Piercing Screws
- Hex Washer, Serrated - Unslotted, Full Thread, Stl Zinc Self-Piercing Screws
- Modified Truss, Phillips, Full Thread, 18-8 SS Self-Piercing Screws
- Modified Truss Self-Piercing Screws, 410 Stainless
- Pancake Head, Self Piercing, Steel Zinc
- SEMS Screws (Machine Screw Thread)
- Set Screw
- Socket Screws, Hex Wrenches, Pipe Plugs
- Thread Cutting Screws
- Thread Rolling Screws/ Thread Forming Screws
- Thumb Screws & Wing Screws
- Weld Screws
- Wood Screws & Deck/Drywall Screws
- Spacers, Standoffs & Electronic Hardware
-
Stainless Steel Fasteners
- Stainless Steel Anchors
- Stainless Steel Bolts
- Stainless Steel Cap Screws, Hex
- Stainless Steel Drywall Screws & Stainless Steel Deck Screws
- Stainless Steel Electronic Hardware
- Stainless Steel Flange Screws, 18-8
- Stainless Steel Lag Screws
- Stainless Steel Machine Screws
- Stainless Steel Metric Fasteners
- Military Hardware
- Stainless Steel Nuts
- Stainless Steel Slotted Pins
- Stainless Steel Retaining Rings
- Stainless Steel Self-Drilling Screws
- Stainless Steel Self-Piercing Screws
- Stainless Steel Self-Tapping Screws
- Stainless Steel Sems
- Stainless Steel Socket Srews
- Stainless Steel Thread-Cutting Screws
- Stainless Steel Thread-Rolling Screws
- Stainless Steel Thumb Screws
- Stainless Steel Washers
- Stainless Steel Wood Screws
- Studs- Clinch & B7
- Washers
- Weld Screws & Weld Nuts